Quickshot SE
Degraded fuel presents a major
maintenance issue in small engines and
powersports equipment. It can form varnish, gum
and insoluble debris that clog carburetors, fuel
injectors and fuel filters. Carbon buildup can
form on the tops of pistons that leads to
pre-ignition, rough idling and poor throttle
response. Fuel-related problems are only
expected to intensify in the coming years as the
ethanol content in pump gasoline continues to
increase.
AMSOIL Quickshot SE (AQS) is a
premium fuel additive formulated to thoroughly
clean and restore peak performance in small
engine and powersports equipment fuel systems.
It also stabilizes fuel between uses and during
short-term storage periods. Its revolutionary
technology focuses on three major fuel-related
issues plaguing small engines and powersports
equipment: ethanol, water and dirty pump gas.
Ethanol
Ethanol in fuel has a tendency to absorb water
and separate from the gasoline, sinking to the
bottom of the gas tank, where it quickly
degrades and creates gum, varnish and other
insoluble debris that can plug fuel flow
passages and negatively affect engine
performance. When this ethanol/water mixture is
pulled
into the engine, it creates a lean burn
situation that increases combustion chamber
temperatures and can lead to engine damage.
AMSOIL Quickshot SE is designed to keep water
dispersed throughout the tank, moving it out as
a normal part of operation and decreasing the
chance of ethanol separating from the gasoline.
Quickshot SE was tested in fuel
containing 10 percent ethanol. Controlled
plugging of injectors showed a 70 percent flow
improvement, while oxidation stability improved
44 percent over untreated fuel.
Water
Water finds its way into gas tanks through
condensation in tanks open to the atmosphere,
gas pumps and other environmental conditions,
and if left untreated, will cause a myriad of
starting, performance and corrosion problems. By
keeping water dispersed in tiny molecules and
safely moving it out of the tank through the
combustion chamber, Quickshot SE helps maintain
engine performance and protects against damaging
corrosion.
Dirty Gasoline
Dirty gasoline causes fuel system gumming and
varnish, as well as piston and combustion
chamber deposits. Although all gasoline sold in
the U.S. is formulated with a lowest additive
concentration (LAC) level of detergent
additives, these detergent levels are not enough
to prevent deposits from building up on critical
fuel system components. Quickshot SE contains
unique chemistry that quickly detaches and
carries away deposits and buildups in fuel
systems, injectors and carburetors, while also
cleaning hard-to-remove deposits on piston tops,
spark plugs and other combustion chamber parts.
Save up to 30% on your
order become a preferred customer.

Applications
Quickshot SE is recommended for use in all two-
and four-stroke gasoline-powered engines,
including motorcycles, snowmobiles, boats,
personal watercraft, ATVs, edgers, tillers,
mowers, snowblowers, chainsaws, generators and
farm and construction equipment. However, AMSOIL
P.i. Performance Improver is the superior choice
for passenger vehicle applications.
Recommendations
Quickshot SE is designed for an initial clean-up
dose of 8 oz. per 6 gallons of gasoline,
followed by 8 oz. per 12 gallons thereafter.
|